Tenda TEG1116P-16-150W 1000M and PoE 16-Port Gigabit Ethernet Switch with 16-Port PoE
Quantity must be 1 or more
TEG1116P-16-150W is a Tenda PoE switch that o ers 16 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch o ers a maximum PoE power output of 135 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Isolation to help reduce cabling costs of IP terminals like APs and IP cameras.
16 × Link/Act per device 16 × PoE per device 1 × Power per device
16 10/100/1000Base-T ports(Data/Power)
Packet Forwarding Rate
RAM Data Buffer
MAC Address Table
PoE supply management
Port 1-16 support IEEE802.3at/af PoE standard
PoE through pin
1 2 4 5 + 3 6 7 8 -
294 × 178 × 44mm ( W x D x H )
in full con guration:<150W PoE Max Power Supply: 135W
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. VLAN: ports 1 to 14 are isolated from each other, but can communicate with ports 15 and 16 (uplink ports) respectively. Isolation: ports 1 to 8 and Ports 9 to 16 belong to two di erent VLAN.This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.